JOURNAL OF COSMETIC SCIENCE 26 Fibrous protein protection and repair technologies are becoming increasingly important in the formulation of functional hair and skin treatments. The evaluation of protein redox damage has traditionally been undertaken at a holistic level, such as through protein ex- traction assays or spectrophotometric carbonyl quantitation (4,5). However, for the tar- geted design, optimization and validation of next-generation protein protection and repair technologies, it is critical that robust and sensitive approaches for the evaluation of protein damage at the molecular level be developed and integrated with analysis at higher structural levels. Here, we present the development and utilization of a peptide-based molecular marker approach for profi ling and tracking oxidative damage in keratins, building on expertise in keratin degradation patterns (6,7). The approach is demonstrated using wool keratins, which have high sequence and structural homology with human hair and therefore repre- sent a good model for evaluating the molecular-level effect of cosmetic treatments on keratins. Redox proteomic approaches were applied to characterize light-induced protein damage at the protein primary level in an enriched keratin extract and to track specifi c modifi cations across a range of irradiation conditions. Molecular markers characterized were then utilized to profi le keratin damage to wool fi bers both with and without the application of a protective silicon matrix fi ber surface treatment, demonstrating the effi - cacy and sensitivity of our approach for evaluating protein protection. MATERIALS AND METHODS Nonylphenol ethoxylate (trade name: Teric GN9) was obtained from Orica Ltd (Mel- bourne, Australia). Ethanol and urea were obtained from Merck Chemicals (Darmstadt, Germany). Thiourea was obtained from Sigma-Aldrich (St. Louis, MO) ChromAR® liquid chromatography (LC)-grade water and LC-grade acetonitrile, sodium tetraborate, and hydrochloric acid from J.T. Baker (Mumbai, India) and Univar formic acid from Ajax Finechem (Waltham, MA). Tris and sodium tetrathionate were obtained from BDH (Poole, UK). Sequencing grade trypsin was obtained from Prom ega (Madison, WI). Acrylamide was obtained from Bio-Rad Laboratories (Hercules, CA). α-Cyano-4- hydroxycinnamic acid was obtained from Bruker Daltonics (Bremen, Germany). Nano- ES spray capillaries were obtained from Proxeon (Odense, Denmark). Wool preparation. Mid-side wool samples from Romney fl eece wool were detipped, then scoured and air-dried. This wool was cut into small sections, then freeze-crushed to a fi ne powder using liquid nitrogen in a mortar and pestle. The crushed wool sample was dried under vacuum over phosphorus pentoxide for 2 days. Whole wool samples were obtained in the form of woven, unbleached Merino wool fabric. Keratin extraction. Dried wool powder was extracted overnight in tubes by vigorous shak- ing in a reciprocal shaker at room temperature in 0.1 M Tris, 0.2 M sodium tetrathionate, 0.1 M sodium tetraborate, and 8 M urea, pH 9.5 (HCl). Tubes were centrifuged to pellet the wool residue. The keratins were purifi ed by precipitation and dialysis, and were then freeze-dried. Keratin purity was assessed by 2D gel electrophoresis, with no other wool protein classes observed. Whole wool surface photoprotection treatment. Solgels were prepared as follows: Ethanol (6 ml) was added to 4.48 ml tetraethoxysilane and stirred for 30 min. Phenyltriethoxysilane (4.48 ml) was added, then 0.8 ml water was added dropwise, followed by 0.3 ml 10 M
MOLECULAR MARKER APPROACHES FOR TRACKING REDOX DAMAGE 27 HCl. The solution was kept stirring for 12 h (8). Wool fabric samples (6 cm × 6 cm) were treated with this silicon matrix solgel preparation by dip-coating for 5 min. The coated fabrics were allowed to dry overnight at room temperature and were annealed for 1 h at 120°C. IRRADIATION PROTOCOLS Keratin irradiation. Solid freeze-dried material was dissolved in water at 2 mg/ml and placed in ultraviolet (UV)-transparent quartz test tubes. The keratin solutions were irradiated with UVA, UVB, and/or blue light (9–11) for a period of 3, 24, or 72 h in an LZC4-14 photoreactor (Luzchem Research Inc., Gloucester, Ontario, Canada), at doses of 70,024 mWm−2 (blue), 52,670 mWm−2 (UVA), and 35,337 mWm−2 (UVB). Whole wool irradiation. Squares of untreated Merino wool fabric (3 cm × 3 cm) were treated with the solgel preparation and exposed to UVA and UVB irradiation (9–11) for varying periods to study the photoprotective effi ciency of the matrix treatments. All experiments were run in triplicate. Color evaluation. Squares of wool fabric treated with various silicon matrix preparations were exposed to UVA irradiation. Triplicate color measurements before and after UV ir- radiation were taken using a Minolta Chroma Meter CR210 (Osaka, Japan), with a wide area illumination, a 0° viewing angle, and a 50-mm diameter measuring area to average the reading over a wide area, as suitable for measuring cloth or textured surfaces. This yielded Y-Z values in CIE color space, which correspond very closely to yellowness as perceived by the human eye. A large Y-Z value indicates a very yellow sample. Digestion. After irradiation, the wool was digested using an in-house established protocol: solubilization buffer (180 μl 8 M urea, 50 mM Tris, 50 mM tris(2-carboxyethyl)phos- phine, 2 M thiourea, pH 8) was added to 6 mg of the wool and vigorously stirred over- night at 30°C. The extract was then alkylated with 360 mM acrylamide and the proteins from a 100 μl subsample were precipitated with 400 μl methanol, followed by 100 μl chloroform and then 300 μl water. The precipitate thus obtained was washed with 400 μl methanol, centrifuged at 14,100 g, and the methanol layer removed without disturbing the pellet. The pellet was suspended in 0.1 M ammonium bicarbonate–dimethylformamide (ratio: 7:3) and digested overnight at 37°C with trypsin (1:50), dried in a vacuum centrifuge, and stored at 4°C until further use. The tryptic peptides generated were desalted prior to direct infusion mass spectrometry (MS) with Proxeon StageTips (Prox- eon, Denmark). Chromatography. High-performance liquid chromatography (HPLC) analyses of the kera- tin digests were performed on a Bio-Rad BioLogic DuoFlow system equipped with a QuadTech multiwavelength UV-Vis detector, using a reversed-phase Bio-Rad RP-318 300 Å wide pore C18 column. Mass Spectrometric Analysis: Electrospray Ionization Tandem Mass Spectrometry. Mass spectro- metric analysis was performed on a tandem quadrupole-time-of-fl ight mass spectrometer (QSTAR Pulsar i, AB SCIEX, Framingham, MA), utilizing direct infusion nanospray of aqueous samples. LC-MS/MS was carried out on an Ultimate nanofl ow HPLC equipped with Famos autosampler and Switchos column switching module (Dionex, Sunnyvale, CA). Subsamples (10 μl) were loaded on a C18 trap column (5 mm, 300 μm inner diameter) at
Previous Page Next Page